With the Kit, you should have a WIFI Router Box with a label “Station 1” on it.
If you are installing multiple registers, please ensure that you install the hardware for each station separately. Each piece of hardware is labeled with a Station # sticker.
Let’s Unpack the router. From the box, you should have Router, Power Cable, and LAN cable in the box.
Once we have all the components, we want to connect the Router to the power and LAN cable. Plug the power cable from the Wall Outlet into the router’s power port (Label 2 in the image below).
Connect a LAN cable from your Internet modem to the Internet Port in your router. (Label 1 in the image below)
Once everything is connected, you should see four green lights on the Router, as shown below. This will signify an internet connection is available.
